Resource Lesson
Properties of Vectors
Printer Friendly Version
A
vector
can be equivalently defined as a "directed line segment" or as a physical quantity that must include both its "
magnitude and direction
" to be completely described. For the purposes of this lesson, let's use the letters A, B, C … to represent vector quantities. If A represents a vector that begins at the origin (0,0) and ends are the point (3,4) we can represent it mathematically in several ways.
in
rectangular form
as A = <3,4>
in
i, j notation
as A = 3i + 4j
graphically
as
in
polar notation
as A = (5, 53º)
When
multiplying a vector by a positive scalar
, only the magnitude of the vector is affected.
2A = <6,8>
2A = 6i + 8j
2A = (10, 53º)
If the
scalar is negative
, then the direction is also reversed, or changed by 180º.
-½A = <-1.5, -2>
-½A = -1.5i - 2j
-½A = (2.5, 233º)
Refer to the following information for the next two questions.
B = <8, -15>
C = -12i + 5j
Express vector B in polar notation.
Express vector C in polar notation.
To add two vectors graphically we will use the
"head-to-tail" method
. This literally means placing the
tail
of the second vector at the
head
of the first vector and "tracing the path" of their sum, or the
resultant vector
.
The simplest addition is when you are asked to add vectors that are either parallel (pointing in the same direction) or anti-parallel (pointing in 180º the opposite direction). This requires that you merely add or subtract their magnitudes. Shown below are three examples where we used i,j notation illustrate this process. In this discussion we used two new vectors: D = <10, 0> and E = <4, 0>.
R = D + E
R = (10i + 0j) + (4i + 0j) = 14i + 0j
R = D - E
R = (10i + 0j) - (4i + 0j) = 6i + 0j
R = ½D - 2E
R = (5i + 0j) + (-8i + 0j) = -3i + 0j
Note: subtracting 2E is
equivalent to adding (-2E)
Now let's look at a more complicated example by graphing the sum of our original three vectors, R = A + B + C.
Notice that vector B starts at the end of vector A and vector C starts at the end of B. We are literally "tracing the path" of A + B + C. The resultant, R, equals the sum of the three vectors. It begins at the "tail" of A and ends at the "head" of C. That is, it begins at the start of vector A and ends at the end of vector C. To mathematically determine the magnitude and direction of our resultant we will have to use an x|y chart which will be discussed momentarily after we have alerted you to the
commutative nature of vector addition
.
R = B + A + C
R = C + B + A
Notice that the resultant, R, always starts at the beginning of the first vector (the solid xy-origin) and terminates at the end of the last vector. Also note that in each case R has the same rectangular form: <-1, -6> regardless of the order in which A, B, and C were added.
To analytically determine the sum of two or more vectors without the assistance of a head-to-tail diagram, the use of an
x|y chart
is recommended. This chart organizes the i,j components of each vector. Given below is an x|y chart using the information from our last example: R = A + B + C.
x
y
3
4
8
-15
-12
5
-1
-6
Our resultant can be expressed in i,j form as R = -i - 6j.
As shown in the column to the right, R can be expressed in polar form as R = (6.1, 260.5º).
To express this outcome in polar notation requires the use of the Pythagorean Theorem and the trig function tangent.
Our final discussion will be on how to calculate the
components of a vector
when it is initially stated in polar form. Let's start our investigation with the vector F = (50, 106.3º) which terminates in Quadrant II.
If we wanted to add F to vector 2A = <6,8> we would first need to transform F into its
two rectangular components
: one directed along the negative-x axis and the other directed along the positive-y axis as shown in the diagram below. Note that these directions were chosen because they form the "borders" of Quadrant II.
To begin our conversion, we first drop dotted perpendiculars from the end of F to each axis. The x-component is calculated using the trig function cosine.
cos θ is defined as the ratio of the length of the adjacent side to the length of the hypotenuse in a right triangle; or
cos θ = adj/hyp
.
x = F cos θ
The y-component is calculated using the trig function sine.
sin θ is defined as the ratio of the length of the opposite side to the length of the hypotenuse in a right triangle; or
sin θ = opp/hyp
.
y = F sin θ
In our case, the
reference angle, θ
, equals 73.5º. Recall from trig class that the reference angle is an acute angle that is always measured to the nearest x-axis, never to the y-axis. Our diagram shows us that vector F = (50, 106.3º) can now be restated in rectangular form as F = <-48, 14>.
Returning to our original problem, the sum of vector F and the vector 2A would be
R = (6i + 8j) + (-48i + 14j) = -42i + 22j
which expressed in polar form would be
R = (47.4, 152º)
Related Documents
Lab:
Labs -
2-Meter Stick Readings
Labs -
Acceleration Down an Inclined Plane
Labs -
Addition of Forces
Labs -
Circumference and Diameter
Labs -
Cookie Sale Problem
Labs -
Density of a Paper Clip
Labs -
Determining the Distance to the Moon
Labs -
Determining the Distance to the Sun
Labs -
Eratosthenes' Measure of the Earth's Circumference
Labs -
Force Table - Force Vectors in Equilibrium
Labs -
Home to School
Labs -
Indirect Measurements: Height by Measuring The Length of a Shadow
Labs -
Indirect Measures: Inscribed Circles
Labs -
Inertial Mass
Labs -
Introductory Simple Pendulums
Labs -
Lab: Rectangle Measurements
Labs -
Lab: Triangle Measurements
Labs -
Marble Tube Launcher
Labs -
Quantized Mass
Labs -
The Size of the Moon
Labs -
The Size of the Sun
Labs -
Video Lab: Falling Coffee Filters
Resource Lesson:
RL -
Basic Trigonometry
RL -
Basic Trigonometry Table
RL -
Curve Fitting Patterns
RL -
Dimensional Analysis
RL -
Linear Regression and Data Analysis Methods
RL -
Metric Prefixes, Scientific Notation, and Conversions
RL -
Metric System Definitions
RL -
Metric Units of Measurement
RL -
Potential Energy Functions
RL -
Properties of Lines
RL -
Significant Figures and Scientific Notation
RL -
Vector Resultants: Average Velocity
RL -
Vectors and Scalars
Review:
REV -
Honors Review: Waves and Introductory Skills
REV -
Physics I Review: Waves and Introductory Skills
REV -
Test #1: APC Review Sheet
Worksheet:
APP -
Puppy Love
APP -
The Dognapping
APP -
The Pool Game
APP -
War Games
CP -
Inverse Square Relationships
CP -
Sailboats: A Vector Application
CP -
Satellites: Circular and Elliptical
CP -
Tensions and Equilibrium
CP -
Vectors and Components
CP -
Vectors and Resultants
CP -
Vectors and the Parallelogram Rule
WS -
Calculating Vector Resultants
WS -
Circumference vs Diameter Lab Review
WS -
Data Analysis #1
WS -
Data Analysis #2
WS -
Data Analysis #3
WS -
Data Analysis #4
WS -
Data Analysis #5
WS -
Data Analysis #6
WS -
Data Analysis #7
WS -
Data Analysis #8
WS -
Density of a Paper Clip Lab Review
WS -
Dimensional Analysis
WS -
Frames of Reference
WS -
Graphical Relationships and Curve Fitting
WS -
Indirect Measures
WS -
Lab Discussion: Inertial and Gravitational Mass
WS -
Mastery Review: Introductory Labs
WS -
Metric Conversions #1
WS -
Metric Conversions #2
WS -
Metric Conversions #3
WS -
Metric Conversions #4
WS -
Properties of Lines #1
WS -
Properties of Lines #2
WS -
Scientific Notation
WS -
Significant Figures and Scientific Notation
TB -
Working with Vectors
TB -
Working with Vectors
REV -
Math Pretest for Physics I
PhysicsLAB
Copyright © 1997-2017
Catharine H. Colwell
All rights reserved.
Application Programmer
Mark Acton