Lab
Target Lab: Ball Bearing Rolling Down an Inclined Plane
Printer Friendly Version
Purpose:
To predict the landing point of a projectile after it has
rolled down a ramp
.
Equipment needed:
Each group needs: a ramp, target paper, carbon paper, meter stick, and plumb line.
Resource Lessons:
2D projectiles (horizontal release)
,
Conservation of Energy
, and
Rotational Kinetic Energy
Background
Remember that when analyzing twodimensional projectile motion, the horizontal and vertical motions are independent of each other. Horizontally, projectiles in freefall travel at a constant velocity; while vertically, they experience uniform acceleration resulting in a classic parabolic trajectory. Our secret to working projectile problems was to build a chart in which we delineated the
Horizontal

Vertical
properties in each situation.
Horizontally, the only equation available to us was R = v
_{H}
t, where v
_{H}
represents the projectile's constant horizontal velocity. Vertically, in the above illustration, the projectile's initial velocity equaled zero, since it was launched straight forward. Usually, in this situation, we let v
_{o}
= 0, a = 9.8 m/sec
^{2}
, and s = h and then used the kinematics equation s = v
_{o}
t + ½at
^{2}
to solve for the time that the projectile spent in the air.
Your goal in this experiment is to predict where a steel ball will land on the floor after having rolled down an incline plane. The final test of your measurements and computations will be to position a bull'seye on the floor so that the ball lands in its center circle on the first attempt. Make sure that ALL measurements and calculations are reported with
three significant figures
.
Part I: The Experiment
Step 1:
Assemble your ramp. Make it as sturdy as possible so the steel ball bearing rolls smoothly and consistently. The ramp should not sway or bend. Since the ball bearing must leave the table horizontally, make sure that the horizontal part of the ramp is level with the surface of the table. The vertical height, h, of the ramp should be no less than 7 cm.
Step 2:
Calculate the ball bearing's horizontal velocity at the base of the ramp using conservation of energy principles. At the top of the ramp, if the ball bearing is released from rest, it will only have potential energy, PE, which equals the product of its mass (in kilograms) times the acceleration due to gravity (9.8 m/sec
^{2}
) and its height (in meters) above an arbitrary reference line. At the base of the ramp, the ball has both translational kinetic energy, KE = ½mv
^{2}
, and rotational kinetic energy, KE
_{rot}
= ½
I
w
^{2}
. Recall that the moment of inertia for a solid sphere equals
I
= (2/5)mr
^{2}
and that v = r
w
.
PE
_{top}
= Total KE
_{base}
mgh = ½mv
^{2}
+ ½
I
w
^{2}
This velocity at the base of the incline will remain the ball bearing's horizontal velocity when it leaves the table. Remember that you will need to release the ball at the very top of the ramp and not put any pressure against the ramp that might result in it "springing" forward when the ball is released.
How high (in cm) was the back of your ramp (ruler) above the top of the table?
What will be your ball bearing's horizontal velocity (in m/sec) at the base of its ramp? Show your calculations for the ball's horizontal velocity in the space provided below on your answer sheet.
Why did you not need to measure the ball bearing's mass for these calculations?
Step 3:
Using a plumb line, string, and meter stick to measure and record in blank below the vertical height of the lab table above the floor in centimeters.
Step 4:
Using the appropriate equation from the background information given above, calculate the time, t, that the ball bearing will take to fall from the base of the ramp on the table's surface to the floor.
t (in sec) =
Step 5:
The range is the horizontal distance a projectile once it is leaves the table until it strikes the floor. Calculate the range of the ball bearing. Show your equation and any necessary calculations used in predicting the ball's range.
R (in m) =
Teacher certification that you have calculated your experimental range.
Step 6
: Now tape your target paper on the floor so that its target line is at the prediected range. When you are ready to release the ball bearing, call your instructor over to witness your trial. Remember to make sure that the ball is released from the top of the ramp. (You will be allowed a maximum of three releases.) You may remove your target paper from the floor to measure how far the ball's impact point was located from your predicted range.
End of Part I:
If the ball bearing overshot the target then report your answer as a + x number of centimeters. If it fell short of the target report your answer as  x number of centimenters.
Step 7.
Our ball missed the center of the bullseye by ___ cm.
Part II: Analysis of Experimental Results
Obtain from your teacher a glass marble. Roll the glass marble down your ramp and observe the ballramp system. Catch the ball when it lease the ramp so that it doesn't strike the ground.
Step 8.
What do you notice about the ramp as the glass marble rolls down the track?
Step 9.
Are there ramifications to your previous observation that might explain your ball bearing's actual experimental rang reported in Step 7?
Remember that all of your calculations are to be done in meters, kilograms, and seconds,
projectile motion
flight time
s = v
_{o}
t + ½at
^{2}
(sec)
vertical v
_{f}
v
_{f}
= v
_{o}
+ at
(m/sec)
actual v
_{H}
R
_{exp}
= v
_{H}
t
(m/sec)
v
_{R}
resultant
impact velocity
(m/sec)
Step 10.
State the mass of your ball bearing in kilograms.
energy calculations
total PE
ramp + table
mg(h + H)
(J)
total KE
_{trans}
(1/2)mv
_{R}
^{2}
(J)
total KE
_{rot}
(1/5)mv
_{H}
^{2}
(J)
total KE
(J)
Step 11.
Explain why you think that you were asked to use v
_{R}
when calculating the ball's final translational KE at impact but were only asked to use v
_{H}
when calculating the ball's total rotational KE at impact?
Step 12.
How much total mechanical energy was lost during the experiment?
Step 13.
What percentage of the ball's total PE was transformed into rotational kinetic energy?
Part III: Graphical Analysis of the ball bearing's translational velocity
During this lab, the marble changed both its horizontal and vertical motion as it moved along the path from the top of the ramp to the point just where it struck the ground. The path can be broken into three parts: rolling down the angled portion of the ramp, rolling along the flat section of the ramp, and leaving the table as a projectile in twodimensions.
Given below are nine "general" curves for you to form the best three combinations for the velocity graph requested. You may use a "general" curve more than once if neessary.
Step 14.
Complete the following graph of
horizontal velocity vs time
by choosing the best "general" curve for each section.
A to B
B to C
C to D
Step 15.
Complete the following graph of
vertical velocity vs time
by choosing they best "general" curve for each section.
A to B
B to C
C to D
After submitting your results, each group is to turn in your "target paper" and all of your calculations.
Related Documents
Lab:
Labs 
A Battering Ram
Labs 
A Photoelectric Effect Analogy
Labs 
Acceleration Down an Inclined Plane
Labs 
Air Track Collisions
Labs 
Ballistic Pendulum
Labs 
Ballistic Pendulum: Muzzle Velocity
Labs 
Bouncing Steel Spheres
Labs 
Coefficient of Friction
Labs 
Coefficient of Kinetic Friction (pulley, incline, block)
Labs 
Collision Pendulum: Muzzle Velocity
Labs 
Conservation of Energy and Vertical Circles
Labs 
Conservation of Momentum
Labs 
Conservation of Momentum in TwoDimensions
Labs 
Cookie Sale Problem
Labs 
Flow Rates
Labs 
Freefall MiniLab: Reaction Times
Labs 
Freefall: Timing a Bouncing Ball
Labs 
Galileo Ramps
Labs 
Gravitational Field Strength
Labs 
Home to School
Labs 
Inelastic Collision  Velocity of a Softball
Labs 
InterState Map
Labs 
LAB: Ramps  Accelerated Motion
Labs 
LabPro: Newton's 2nd Law
Labs 
LabPro: Uniformly Accelerated Motion
Labs 
LooptheLoop
Labs 
Mass of a Rolling Cart
Labs 
Moment of Inertia of a Bicycle Wheel
Labs 
Monkey and the Hunter Animation
Labs 
Monkey and the Hunter Screen Captures
Labs 
Projectiles Released at an Angle
Labs 
Ramps: Sliding vs Rolling
Labs 
Range of a Projectile
Labs 
Roller Coaster, Projectile Motion, and Energy
Labs 
Rotational Inertia
Labs 
Rube Goldberg Challenge
Labs 
Spring Carts
Labs 
Terminal Velocity
Labs 
Video LAB: A Gravitron
Labs 
Video Lab: Ball Bouncing Across a Stage
Labs 
Video LAB: Ball ReBounding From a Wall
Labs 
Video Lab: Blowdart Colliding with Cart
Labs 
Video Lab: Cart Push #2 and #3
Labs 
Video LAB: Circular Motion
Labs 
Video Lab: Falling Coffee Filters
Labs 
Video Lab: M&M Collides with Pop Can
Labs 
Video Lab: Marble Collides with Ballistic Pendulum
Labs 
Video Lab: TwoDimensional Projectile Motion
Resource Lesson:
RL 
Accelerated Motion: A Data Analysis Approach
RL 
Accelerated Motion: VelocityTime Graphs
RL 
Analyzing SVA Graph Combinations
RL 
APC: Work Notation
RL 
Average Velocity  A Calculus Approach
RL 
Chase Problems
RL 
Chase Problems: Projectiles
RL 
Comparing Constant Velocity Graphs of PositionTime & VelocityTime
RL 
Conservation of Energy and Springs
RL 
Constant Velocity: PositionTime Graphs
RL 
Constant Velocity: VelocityTime Graphs
RL 
Derivation of the Kinematics Equations for Uniformly Accelerated Motion
RL 
Derivatives: Instantaneous vs Average Velocities
RL 
Directions: Flash Cards
RL 
Energy Conservation in Simple Pendulums
RL 
Freefall: Horizontally Released Projectiles (2DMotion)
RL 
Freefall: Projectiles in 1Dimension
RL 
Freefall: Projectiles Released at an Angle (2DMotion)
RL 
Gravitational Energy Wells
RL 
Mechanical Energy
RL 
Momentum and Energy
RL 
Monkey and the Hunter
RL 
Potential Energy Functions
RL 
Principal of Least Action
RL 
Rotational Dynamics: Pivoting Rods
RL 
Rotational Kinetic Energy
RL 
Springs and Blocks
RL 
Summary: Graph Shapes for Constant Velocity
RL 
Summary: Graph Shapes for Uniformly Accelerated Motion
RL 
SVA: Slopes and Area Relationships
RL 
Symmetries in Physics
RL 
Tension Cases: Four Special Situations
RL 
Vector Resultants: Average Velocity
RL 
Work
RL 
Work and Energy
Review:
REV 
Test #1: APC Review Sheet
Worksheet:
APP 
Hackensack
APP 
The Baseball Game
APP 
The Big Mac
APP 
The Cemetary
APP 
The Golf Game
APP 
The Jogger
APP 
The Pepsi Challenge
APP 
The Pet Rock
APP 
The Pool Game
APP 
The Spring Phling
CP 
2D Projectiles
CP 
Conservation of Energy
CP 
Dropped From Rest
CP 
Freefall
CP 
Momentum and Energy
CP 
Momentum and Kinetic Energy
CP 
NonAccelerated and Accelerated Motion
CP 
Power Production
CP 
Satellites: Circular and Elliptical
CP 
Tossed Ball
CP 
Up and Down
CP 
Work and Energy
NT 
Average Speed
NT 
BackandForth
NT 
Cliffs
NT 
Crosswinds
NT 
Elliptical Orbits
NT 
Escape Velocity
NT 
Gravitation #2
NT 
Headwinds
NT 
Monkey Shooter
NT 
Pendulum
NT 
Projectile
NT 
Ramps
NT 
Satellite Positions
WS 
Accelerated Motion: Analyzing VelocityTime Graphs
WS 
Accelerated Motion: Graph Shape Patterns
WS 
Accelerated Motion: Practice with Data Analysis
WS 
Advanced Properties of Freely Falling Bodies #1
WS 
Advanced Properties of Freely Falling Bodies #2
WS 
Advanced Properties of Freely Falling Bodies #3
WS 
Average Speed and Average Velocity
WS 
Average Speed Drill
WS 
Charged Projectiles in Uniform Electric Fields
WS 
Chase Problems #1
WS 
Chase Problems #2
WS 
Chase Problems: Projectiles
WS 
Combining Kinematics and Dynamics
WS 
Constant Velocity: Converting Position and Velocity Graphs
WS 
Constant Velocity: PositionTime Graphs #1
WS 
Constant Velocity: PositionTime Graphs #2
WS 
Constant Velocity: PositionTime Graphs #3
WS 
Constant Velocity: VelocityTime Graphs #1
WS 
Constant Velocity: VelocityTime Graphs #2
WS 
Constant Velocity: VelocityTime Graphs #3
WS 
Converting st and vt Graphs
WS 
Energy Methods: More Practice with Projectiles
WS 
Energy Methods: Projectiles
WS 
Energy/Work Vocabulary
WS 
Force vs Displacement Graphs
WS 
Freefall #1
WS 
Freefall #2
WS 
Freefall #3
WS 
Freefall #3 (Honors)
WS 
Horizontally Released Projectiles #1
WS 
Horizontally Released Projectiles #2
WS 
Introduction to Springs
WS 
Kinematics Along With Work/Energy
WS 
Kinematics Equations #1
WS 
Kinematics Equations #2
WS 
Kinematics Equations #3: A Stop Light Story
WS 
Lab Discussion: Gravitational Field Strength and the Acceleration Due to Gravity
WS 
PositionTime Graph "Story" Combinations
WS 
Potential Energy Functions
WS 
Practice: Momentum and Energy #1
WS 
Practice: Momentum and Energy #2
WS 
Practice: Vertical Circular Motion
WS 
Projectiles Released at an Angle
WS 
Rotational Kinetic Energy
WS 
Static Springs: The Basics
WS 
SVA Relationships #1
WS 
SVA Relationships #2
WS 
SVA Relationships #3
WS 
SVA Relationships #4
WS 
SVA Relationships #5
WS 
Work and Energy Practice: An Assortment of Situations
WS 
Work and Energy Practice: Forces at Angles
TB 
2A: Introduction to Motion
TB 
2B: Average Speed and Average Velocity
TB 
Antiderivatives and Kinematics Functions
TB 
Honors: Average Speed/Velocity
TB 
Kinematics Derivatives
TB 
Projectile Summary
TB 
Projectile Summary
TB 
Projectiles Mixed (Vertical and Horizontal Release)
TB 
Projectiles Released at an Angle
TB 
Set 3A: Projectiles
TB 
Work, Power, Kinetic Energy
PhysicsLAB
Copyright © 19972018
Catharine H. Colwell
All rights reserved.
Application Programmer
Mark Acton