Lab
Static Equilibrium Lab
Printer Friendly Version
Purpose:
In this lab we will experimentally calculate the mass of a suspended weight by placing the weight in static equilibrium and measuring the tension in 6 locations.
You will need the
following materials:
one
piece of string approximately 90-cm long, one trapeze with a horizontal bar and two sliding clamps, two
2.5-newton spring scales with a 350-grams of mass
or two 5.0-newton spring scales with a 500-gram mass, and two meter sticks.
To begin, record the following information in the blanks provided below.
Refer to the following information for the next two questions.
Control Values
mass of suspended weight in grams
height of horizontal beam above the top of the table in cm
Next we will position the two sliding clamps at six different separation distances. At each separation, hang the weight from the string and adjust the mass' position until the spring scales have the same reading. Measure the tension on each spring scale and record your answer to two decimal places. Next measure the distance from the TOP of the hooked mass to the top of the table. Record your measurements in the data table provided.
Refer to the following information for the next six questions.
Data Table
separation distance
height above table
tension in
strings
(cm)
(cm)
(N)
15
25
35
45
55
65
Refer to the following information for the next nine questions.
Analysis and Conclusions:
By subtracting the height of the hook of the hanging mass above the lab table from the height of the bar above the lab table, we can calculate the vertical displacement of the suspended mass. By dividing the distance between the sliding clamps in half, we can calculate the horizontal displacement of the suspended hooked mass. These measurements will give us the tangent of the angle between the bar and the spring scales.
Once we know the tangent value, we can calculate the angle and any other required trig values.
Examination of the hanging mass reveals the following freebody diagram centered on the hook at the top of the suspended mass.
Since the position of the mass was adjusted until the tensions on the two spring scales were identical, the horizontal components, T cos(
q
), cancel each other. The equation for vertical equilibrium based on our freebody diagram is shown below.
In our experiment, the tension,
T
, was the dependent variable while the angle,
q
, was the independent variable. The final equation shown above represents the theoretical equation for our line.
Open the EXCEL file 1-staticequilibrium.xls and enter your data recorded in your data table.
What was the name of your file saved on the filesystem for this lab?
What was the numerical value of the slope of your line?
According to the FBD, how many forces were acting on the hook of the suspended mass?
Explain why we graphed
T vs csc
q
instead of
T vs sin
q
.
Based on your equation, what does the slope of your line represent?
What was the experimental mass of your suspended weight in grams?
What is your experiment's percent error?
What was the average value of your six vertical components on your EXCEL sheet? (see column I)
What does this average represent?
Related Documents
Lab:
Labs -
Coefficient of Friction
Labs -
Coefficient of Friction
Labs -
Coefficient of Kinetic Friction (pulley, incline, block)
Labs -
Conservation of Momentum in Two-Dimensions
Labs -
Falling Coffee Filters
Labs -
Force Table - Force Vectors in Equilibrium
Labs -
Inelastic Collision - Velocity of a Softball
Labs -
Inertial Mass
Labs -
LabPro: Newton's 2nd Law
Labs -
Loop-the-Loop
Labs -
Mass of a Rolling Cart
Labs -
Moment of Inertia of a Bicycle Wheel
Labs -
Relationship Between Tension in a String and Wave Speed
Labs -
Relationship Between Tension in a String and Wave Speed Along the String
Labs -
Static Springs: Hooke's Law
Labs -
Static Springs: Hooke's Law
Labs -
Static Springs: LabPro Data for Hooke's Law
Labs -
Terminal Velocity
Labs -
Video LAB: A Gravitron
Labs -
Video LAB: Ball Re-Bounding From a Wall
Labs -
Video Lab: Falling Coffee Filters
Resource Lesson:
RL -
Advanced Gravitational Forces
RL -
Air Resistance
RL -
Air Resistance: Terminal Velocity
RL -
Forces Acting at an Angle
RL -
Freebody Diagrams
RL -
Gravitational Energy Wells
RL -
Inclined Planes
RL -
Inertial vs Gravitational Mass
RL -
Newton's Laws of Motion
RL -
Non-constant Resistance Forces
RL -
Properties of Friction
RL -
Springs and Blocks
RL -
Springs: Hooke's Law
RL -
Static Equilibrium
RL -
Systems of Bodies
RL -
Tension Cases: Four Special Situations
RL -
The Law of Universal Gravitation
RL -
Universal Gravitation and Satellites
RL -
Universal Gravitation and Weight
RL -
What is Mass?
RL -
Work and Energy
Worksheet:
APP -
Big Fist
APP -
Family Reunion
APP -
The Antelope
APP -
The Box Seat
APP -
The Jogger
CP -
Action-Reaction #1
CP -
Action-Reaction #2
CP -
Equilibrium on an Inclined Plane
CP -
Falling and Air Resistance
CP -
Force and Acceleration
CP -
Force and Weight
CP -
Force Vectors and the Parallelogram Rule
CP -
Freebody Diagrams
CP -
Gravitational Interactions
CP -
Incline Places: Force Vector Resultants
CP -
Incline Planes - Force Vector Components
CP -
Inertia
CP -
Mobiles: Rotational Equilibrium
CP -
Net Force
CP -
Newton's Law of Motion: Friction
CP -
Static Equilibrium
CP -
Tensions and Equilibrium
NT -
Acceleration
NT -
Air Resistance #1
NT -
An Apple on a Table
NT -
Apex #1
NT -
Apex #2
NT -
Falling Rock
NT -
Falling Spheres
NT -
Friction
NT -
Frictionless Pulley
NT -
Gravitation #1
NT -
Head-on Collisions #1
NT -
Head-on Collisions #2
NT -
Ice Boat
NT -
Rotating Disk
NT -
Sailboats #1
NT -
Sailboats #2
NT -
Scale Reading
NT -
Settling
NT -
Skidding Distances
NT -
Spiral Tube
NT -
Tensile Strength
NT -
Terminal Velocity
NT -
Tug of War #1
NT -
Tug of War #2
NT -
Two-block Systems
WS -
Advanced Properties of Freely Falling Bodies #1
WS -
Advanced Properties of Freely Falling Bodies #2
WS -
Calculating Force Components
WS -
Charged Projectiles in Uniform Electric Fields
WS -
Combining Kinematics and Dynamics
WS -
Distinguishing 2nd and 3rd Law Forces
WS -
Force vs Displacement Graphs
WS -
Freebody Diagrams #1
WS -
Freebody Diagrams #2
WS -
Freebody Diagrams #3
WS -
Freebody Diagrams #4
WS -
Introduction to Springs
WS -
Kinematics Along With Work/Energy
WS -
Lab Discussion: Gravitational Field Strength and the Acceleration Due to Gravity
WS -
Lab Discussion: Inertial and Gravitational Mass
WS -
net F = ma
WS -
Practice: Vertical Circular Motion
WS -
Ropes and Pulleys in Static Equilibrium
WS -
Standard Model: Particles and Forces
WS -
Static Springs: The Basics
WS -
Vocabulary for Newton's Laws
WS -
Work and Energy Practice: Forces at Angles
TB -
Systems of Bodies (including pulleys)
TB -
Work, Power, Kinetic Energy
PhysicsLAB
Copyright © 1997-2018
Catharine H. Colwell
All rights reserved.
Application Programmer
Mark Acton